C5300 vcxo vectron international, llc 100 watts street mount holly springs pa 17065 t 717 486 3411 f 717 486 5920 www.vectron.co m previous corning model numbers mc0 44 , mc 344, mc0 46, mc346, mc047, mc347, mc049, mc349, mc048, mc318 , mc328, and mc348 frequency range 1.0 to 800 .0 mhz ( acmos/ttl available up to 1 25 mhz. lvpecl f requencies above 220 mhz are achieved through use of pll or analog multiplier) standard freq uencies 19.44, 32.768, 44.736, 51.84, 77.76, 155.52, 622.08 mhz frequency stabilities 1 parameter min typ max. units condition ordering code 5 vs. operating temperature range 0 + 70 c c - xxx (referenced to +25 c) - 45 +85 c f - xxx supp ly voltage ch ange vs. load change vs aging /1 year vs. aging / year (following years) - 2 - 1 - 5 - 1 3 + 2 +1 + 5 + 1 ppm ppm ppm ppm v s 5% load 5% supply voltage (vs) parameter min typ max. units condition ordering code 5 supply voltage 4.75 5 5.25 vdc sv050 current consumption 15 ma acmos /ttl 1.0 to 23.9 mhz 20 ma acmos /ttl 24 to 49.9 mhz 40 ma acmos /ttl 50 to 80.0 mhz 100 ma lvpecl no load supply voltage 3.135 3.3 3.465 vdc sv033 current consumption 6 ma acmos 1.0 to 14.90 mhz 8 ma acmos 15.0 to 39.9 mhz 12 ma acmos 40.0 to 59.9 mhz 16 ma acmos 60.0 to 79.9 mhz 6 0 ma acmos 80.0 to 125.0 mhz 100 ma lvpecl no load r f output parameter min typ max. units condition ordering code 5 signal acmos rfa load 15 50 pf signal level (vol) 0.5 vdc vs= 5.0v and 15pf load 0.3 vdc vs=3.3v and 15pf load signal level (voh) 4.5 vdc vs= 5.0v and 15pf load 3.0 vdc vs=3.3v and 15pf load rise and fall times for acmos (measured 10% to 90%) 10 5 3 ns ns ns 1.0 to 23.9 mhz 24.0 to 79.9 mhz 80.0 to 125.0mhz duty cycle 45 40 55 60 % % @ 50% vs< 15 mhz @ 50% vs > 15 mhz signal ttl rft load 10 typical applications features base stations 9x14 j leaded surface mount package test equipment reflow process compatible optional telecom & wireless infrastructure acmos, ttl and lvpecl digital switching
C5300 vcxo vectron international, llc 100 watts street mount holly springs pa 17065 t 717 486 3411 f 717 486 5920 www.vectron.co m signal level (vo l ) 0.5 vdc vs= 5.0v and 15pf load signal level (voh) 4.5 vdc vs= 5.0v and 15pf load rise and fall times for ttl (measured 0.8v to 2.0v) 5 3 ns ns 1. 0 to 23.9 mhz 24 to 125 mhz duty cycle 45 40 55 60 % % @ 1.4v < 15 mhz @ 1.4v > 15 mhz signal pecl/ lvpecl rfp load 50 into v s - 2v or thevenin equivalent signal leve l (vo l ) vs - 1.62 vdc signal level (voh) vs - 1.025 vdc start - up time 10 ms rise and fall times (measured @ 20% to 80%) 1000 600 ps ps <100 mhz > 100 mhz duty cycle lvpecl 45 55 % @ 50% vdd 40 60 % @ 50% vdd jitter (rms) 5 1 ps ps bw = 10hz to 20 mhz bw = 12 khz to 20 mhz period j itter (pk - pk) 40 ps 10,000 samples - rising edge frequency tuning (efc) parameter min typ max. units condition ordering code absolute pull range 30 ppm ap033 50 ppm ap050 linearity 10 15 % tuning slope positive control voltage range 0.5 2.5 4.5 vdc with vs=5.0vdc 0.3 1. 6 5 3.0 vdc with vs=3.3vdc additional parameters parameter min typ max. units condition phase noise 3 - 60 dbc/hz 1 0 hz measured @ 52.00 mhz - 90 dbc/hz 10 0 hz - 120 dbc/hz 1 k hz - 140 dbc/hz 1 0 khz - 145 dbc/hz 10 0 khz - 50 dbc/hz 10 hz measured @ 155.52 mhz - 80 dbc/hz 100 hz - 11 0 dbc/hz 1 khz - 1 33 dbc/hz 10 khz - 1 4 5 dbc/hz 100 khz weight g processing & packing handling & processing note output enable 6 logic "0" input = outputs dis abled (tri - state) logic "1" or floating input = outputs en abled ) acmos/ttl output logic "0" or floating input = outputs enabled logic "1" input = outputs di s abled (tri - state ) pecl/ lvpecl o utput weight <2 g processing & packing handling & processing note
C5300 vcxo vectron international, llc 100 watts street mount holly springs pa 17065 t 717 486 3411 f 717 486 5920 www.vectron.co m absolute maximum ratings parameter min typ max. units condition supply voltage (vs) 7.0 v vs=5.0vdc 7.0 v vs=3.3vdc operable temperature range - 55 +85 c stor age temperature range - 55 +125 c enclosures type a - acmos/ttl type b - acmos/ttl package codes: code h e i g h t h p i n l e n g t h l code h e i g h t h p i n l e n g t h l a1 .368 max 1.09 b 1 .368 max 1.09 e 2 = enable/disable pin 2 x = n/c pin 2 pin connections pin connections 1 control voltage 1 control voltage 2 ground (case) 2 enable/disable or n/c 3 rf output 3 ground (case) 4 supply voltage 4 rf output 5 n/c 6 supply voltage type c - pecl/lvpecl
C5300 vcxo vectron international, llc 100 watts street mount holly springs pa 17065 t 717 486 3411 f 717 486 5920 www.vectron.co m package codes: code h e i g h t h p i n l e n g t h l c 1 .368 max 1.09 e2 = enable/disable pin 2 x = n/c pin 2 pin connections 1 control voltage 2 enable/disable or nc 3 ground (case) 4 rf output 5 complementary output 6 supply voltage how to order this product: step 1 use this worksheet to forward the following information to your factory representative: model supply voltage code output code apr code package code enable/disable c5 30 0 example C5300 sv050 rfa ap050 a1 e1 step 2 the factory representative will then respond with a corning model number in the following configuration: model package code dash dash number c 5 300 [customer specified package code] - [factory generated 4 digit number] typi cal p/n c5 30 0a1 - 001 notes: 1 contact factory for improved stabilities or additional product options. not all options and codes are available at all frequencies. 2 unless otherwise stated all values are valid after warm - up time and refer to typical con ditions for supply voltage, frequency control voltage, load, temperature (25c) 3 phase noise degrades increasing output frequency. 4 subject to technical modification. 5 contact factory for availability. 6 contact factory for other options.
|
